SIMULATION.
Instructions:
* Enter the proper CLI show commands and analysis the show outputs on the Cisco devices to answer the multiple-choice questions.
* Not all show commands or show command options are supported or are required in this simulation.
* THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
* From the Device CLI Access diagram, click on the network device icons to gain access to the console of the network devices.
* No console or enable passwords are required.
* To access the four multiple-choice questions, click on the numbered boxes on the left of the top panel.
* There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.
Scenario:
Three topology maps are shown. Using the appropriate show commands, map out the network to identify the correct topology map.
Once you determine the correct network topology, answer the four multiple choice questions.
Device CLI Access:
Topology1:
Topology2:
Topology3:
CE7#
CE8#
PE1#
PE2#
PE8#
S78#
S7#
S8#
Which routers are IQS-XR based (ASR9K) routers?
Explanation/Reference:
Routers d,f and g only
Correct network topology is Topology 2
Use “show cdp neighbor” to check and determine the topology.