| Exam 642-885 | Question id=3368 | High Availability Routing Features |
Refer to the exhibit.
router bgp 64500
bfd multiplier 2
bfd minimum-interval 20
address-family ipv4 unicast
network 10.1.1.0/24
!
address-family ipv6 unicast
!
neighbor 192.168.1.1
remote-as 65001
address-family ipv4 unicast
!
end
Which configuration is missing to complete the configuration task of enabling BFD with the 192.168.1.1 EBGP peer?
| A. |
bfd fast-detect also needs to be enabled globally under router bgp 64500RP/0/RSP0/CPU0:P1(config-bgp)#bfd fast-detect | |
| B. |
bfd fast-detect also needs to be enabled for the address-family under address-family ipv4 unicastRP/0/RSP0/CPU0:P1(config-bgp-af)#bfd fast-detect | |
| C. |
bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor under neighbor 192.168.1.1RP/0/RSP0/CPU0:P1(config-bgp-nbr)#bfd fast-detect | |
| D. |
bfd fast-detect also needs to be enabled for the 192.168.1.1 neighbor address-family under neighbor 192.168.1.1 address-family ipv4 unicastRP/0/RSP0/CPU0:P1(config-bgp-nbr-af)#bfd fast-detect | |
| E. |
bfd fast-detect also needs to be enabled globally on the routerRP/0/RSP0/CPU0:P1(config)#bfd fast-detect |