Refer to the Cisco IOS-XR show output exhibit.
RP/0/RSP0/CPU0:PE1#show mrib route Thu Dec 3 10:11:39.144 UTCIP Multicast Routing Information Base Entry flags: L- Domain-Local Source, E - External Source to the Domain, C - Directly-Connected Check, S - Signal, IA- Inherit Accept, IF - Inherit From, D - Drop, MA - MDT Address, ME - MDT Encap, MD - MDT Decap, MT - MDT Threshold Crossed, MH - MDT interface handle CD - Conditional Decap, MPLS - MPLS Decap, MF - MPLS Encap, EX - Extranet MoFE - MoFRR Enabled, MoFS - MoFRR State Interface flags: F - Forward, A - Accept, IC - Internal Copy, NS - Negate Signal, DP - Don't Preserve, SP - Signal Present, II - Internal Interest, ID - Internal Disinterest, LI - Local Interest, LD - Local Disinterest, DI - Decapsulation Interface EI - Encapsulation Interface, MI - MDT Interface, LVIF - MPLS Encap, EX - Extranet, A2 - Secondary Accept <coutput omitted> (*,224.1.1.1) RPF nbr: 192.168.11.1 Flags: C Up: 12:31:52 Incoming Interface List GigabitEthernet0/0/0/2 Flags: A NS, Up: 12:31:52 Outgoing Interface List Loopback0 Flags: F IC NS II LI, Up: 12:31:52 GigabitEthernet0/0/0/0 Flags: F NS, Up: 12:31:32
Which two statements are correct?

A.	The RPF neighbor 192.168.11.1 is the path towards the RP for the 224.1.1.1 multicast group
B.	The RP for the 224.1.1.1 multicast group is reachable over the Gi0/0/0/0 interface
C.	This router is the RP for the 224.1.1.1 multicast group
D.	Incoming 224.1.1.1 multicast group traffic will be sent out through the Gi0/0/0/0 interface
E.	Incoming 224.1.1.1 multicast group traffic will be sent out through the Gi0/0/0/2 interface