Which option can a network specialist use to configure connected route redistribution inside VRF "TEST" on Cisco IOS XR and allow only the prefix 10.10.10.0/24?

A.	route-policy ALLOW-CONN if destination in PERMIT_PREFIX then pass else drop end-policy ! prefix-set PERMIT_PREFIX 10.10.10.0/24 end-set ! router bgp 65000 vrf TEST rd 65000:10000 address-family ipv4 unicast redistribute connected route-policy ALLOW-CONN
B.	route-policy ALLOW-CONN if source in PERMIT_PREFIX then pass else drop end-policy ! prefix-set PERMIT_PREFIX 10.10.10.0/24 end-set ! router bgp 65000 vrf TEST rd 65000:10000 address-family ipv4 unicast redistribute connected route-policy ALLOW-CONN
C.	route-policy ALLOW-CONN if protocol is connected and source in PERMIT_PREFIX then pass else drop end-policy ! prefix-set PERMIT_PREFIX 10.10.10.0/24 end-set ! router bgp 65000 vrf TEST rd 65000:10000 address-family ipv4 unicast redistribute connected route-policy ALLOW-CONN
D.	route-policy ALLOW-CONN if route-type is local and destination in PERMIT_PREFIX then pass else drop end-policy ! prefix-set PERMIT_PREFIX 10.10.10.0/24 end-set ! router bgp 65000 vrf TEST rd 65000:10000 address-family ipv4 unicast redistribute connected route-policy ALLOW-CONN