Sign Up
Log In
Home
discussion
Exam 642-883 Question id=3429 IS-IS, IPv4, and IPv6 in Service Provider Environments

Enter the proper CLI commands and analysis the outputs on the Cisco routers to answer the multiple-choice questions.

From the network topology diagram, click on each of the router icon to gain access to the console of each router.

No console or enable passwords are required.

There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.

Not all the CLI commands or commands options are supported or required for this simulation

For example, the show running-config and the ping commands are NOT supported in this simulation

All the devices in this simulation have been pre-configured and you are not required to enter in any configurations.


Scenario:
Referring to the network topology diagram shown in the exhibit, use the proper CLI commands on the CE5, PES-and PE6 routers and interpret the supported CLI commands outputs to answerthe four multiple choice questions.

Note: The CE5 router is an IOS router, the PE5 router is an IOS-XR router, and the PE6 router is an IOS-XE router.


CE5#
PE5#
PE6#
Which router(s) is/are IS-Type L1/L2 IS-IS router?

A. CE5 only
B. PE6 only
C. CE5 and PE6 only
D. PE5 and PE6 only
E. CE5, PE5 and PE6

Answer:
PE5 and PE6 only

#show clns neighbor