Refer to the exhibit.



SW2# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 5000.0005.0000 cost 4 Port 1 (GigabitEthernet0/0) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 5000.0006.0000 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec  Interface Role Str Cost Prio.Nbr Type ------------------ ---- --- -------- -------- ---------------------- Gi0/0 Root FWD 4 128.1 P2p Gi0/1 Altn BLK 4 32.2 P2p

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning-tree port-priority 32 command on G0/1 on SW2, but the port remains blocked.
Which command should be entered on the ports that are connected to Link2 to resolve the issue?