SwitchC# show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 255
Number of existing VLANs : 8
VIP Operating Mode : Transparent
VTP Domain Name : cisco.com
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MDS digest : 0xE5 0x28 0x5D 0x3E 0x2F 0xE5 0xAD 0x2B
Configuration last modified by 0.0.0.0 at 1-10-19 09:01:38
SwitchC# show vlan brief
VLAN Name Status Ports
---- --------------------- -------- ---------------------------
1 default active Fa0/3 Fa0/4 Fa0/5 Fa0/6
Fa0/7 Fa0/8 Fa0/9 Fa0/10
Fa0/11 Fa0/12 Fa0/13 Fa0/14
Fa0/15 Fa0/16 Fa0/17 Fa0/18
Fa0/19 Fa0/20 Fa0/21 Fa0/22
Fa0/23 Fa0/24 Po1
110 Finance active
210 HR active Fa0/1
310 Sales active Fa0/2
[...output omitted...]
SwitchC# show int trunk
Port Mode Encapsulation Status Native vlan
Gig1/1 on 802.1q trunking 1
Gig1/2 on 802.1q trunking 1
Port Vlans allowed on trunk
Gig1/1 1-1005
Gig1/2 1-1005
Port Vlans allowed and active in management domain
Gig1/1 1, 110, 210, 310
Gig1/2 1, 110, 210, 310
Port Vlans in spanning tree forwarding state and not pruned
Gig1/1 1, 110, 210, 310
Gig1/2 1, 110, 210, 310
SwitchC# show run interface port-channel 1
interface Port-channel 1
description Uplink_to_Core
switchport mode trunk
SwitchC connects HR and Sales to the Core switch. However, business needs require that no traffic from the Finance VLAN traverse this switch.
Which command meets this requirement?