Refer to the exhibit.
R1# ping
Protocol [ip]:
Target IP address: 3.3.3.3
Repeat count [5]: 3
Datagram size [100]: 1500
Timeout in seconds [2]:
Extended commands [n]: y
Source address or interface: 1.1.1.1
Type of service [0]:
Set DF bit in IP header? [no]: yes
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]: Record
Number of hops [ 9 ]:
Loose, Strict, Record, Timestamp, Verbose[RV]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 3, 1500-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
Packet sent with a source address of 1.1.1.1
Packet sent with the DF bit set
Packet has IP options: Total option bytes= 39, padded length=40
Record route: <*>
(0.0.0.0)
(0.0.0.0)
Unreachable from 10.99.69.2, maximum MTU 1492, Received packet has options
Total option bytes= 39, padded length=40
Record route: <*>
(0.0.0.0)
(0.0.0.0)
[output omitted]
R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?