Refer to the exhibit.
SW1# show etherchannel summary
! output omitted
Group Port-channel Protocol Ports
-------+--------------+----------+----------
1 Po1 (SD)
After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2:
SW2#
09:45:32: %PM-4-ERR_DISABLE: channel-misconfig error detected on Gi0/0, putting Gi0/0 in err-disable state
09:45:32: %PM-4-ERR_DISABLE: channel-misconfig error detected on Gi0/1, putting Gi0/1 in err-disable state
Based on the output from switch SW1 and the log message received on switch SW2, what action should the engineer take to resolve this issue?
| A. |
Configure the same protocol on the EtherChannel on switch SW1 and SW2. | |
| B. |
Define the correct port members on the EtherChannel on switch SW1. | |
| C. |
Correct the configuration error on Interface Gi0/0 on switch SW1. | |
| D. |
Correct the configuration error on Interface Gi0/1 on switch SW1. |