Sign Up
Log In
Home
discussion
Exam 350-401 Question id=5791 Infrastructure

Refer to the exhibit.

Router# show ip ospf interface GigabitEthernet0/1.40 is up, line protocol is up Internet Address 10.3.5.254/24, Area 0, Attached via Network Statement Process ID 1, Router ID 172.16.11.29, Network Type BROADCAST, Cost: 1 Topology-MTID Cost Disabled Shutdown Topology Name 0 1 no no Base Transmit Delay is 1 sec, State DR, Priority 1 Designated Router (ID) 172.16.11.29, Interface address 10.3.5.254 No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 oob-resync timeout 40 No Hellos (Passive interface) Supports Link-local Signaling (LLS) ! lines omitted for brevity GigabitEthernet0/1 is up, line protocol is up Internet Address 172.16.30.1/24, Area 0, Attached via Network Statement Process ID 1, Router ID 172.16.11.29, Network Type BROADCAST, Cost: 1 Topology-MTID Cost Disabled Shutdown Topology Name 0 1 no no Base Transmit Delay is 1 sec, State DR, Priority 1 Designated Router (ID) 172.16.11.29, Interface address 172.16.30.1 No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit S oob-resync timeout 40 No Hellos (Passive interface) Supports Link-local Signaling (LLS) ! lines omitted for brevity GigabitEthernet0/0 is up, line protocol is up Internet Address 172.16.11.29/24, Area 0, Attached via Network Statement Process ID 1, Router ID 172.16.11.29, Network Type BROADCAST, Cost: 1 Topology-MTID Cost Disabled Shutdown Topology Name 0 1 no no Base Transmit Delay is 1 sec, State DROTHER, Priority 1 Designated Router (ID) 172.16.11.27, Interface address 172.16.11.27 Backup Designated router (ID) 172.16.11.30, Interface address 172.16.11.30 Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 oob-resync timeout 40 Hello due in 00:00:07 Supports Link-local Signaling (LLS) ! lines omitted for brevity

A network engineer configures OSPF and reviews the router configuration. Which interface or interfaces are able to establish OSPF adjacency?

A. GigabitEthernet0/0 and GigabitEthernet0/1
B. only GigabitEthernet0/1
C. only GigabitEthernet0/0
D. GigabitEthernet0/1 and GigabitEthernet0/1.40