Refer to the exhibit.

Router2# show policy-map control-plane Control Plane Service-policy input:CISCO Class-map:CISCO (match-all) 20 packets, 11280 bytes 5 minute offered rate O bps, drop rate 0 bps Match:access-group 120 police: 8000 bps, 1500 limit, 1500 extended limit conformed 15 packets, 6210 bytes; action:transmit exceeded 5 packets, 5070 bytes; action:drop violated 0 packets, 0 bytes; action:drop conformed 0 bps, exceed 0 bps, violate 0 bps Class-map:class-default (match-day) 105325 packets, 11415151 bytes 5 minute offered rate O bps, drop rate 0 bps Match:any

An engineer configures CoPP and enters the show command to verify the implementation. What is the result of the configuration?


A.	All traffic will be policed based on access-list 120.
B.	If traffic exceeds the specified rate, it will be transmitted and remarked.
C.	Class-default traffic will be dropped.
D.	ICMP will be denied based on this configuration.