Switch2#
01:25:08: %PM-4-ERR_DISABLE: channel-misconfig error detected on Fa0/23, putting Fa0/23 in err-disable
state
01:25:08: %PM-4-ERR_DISABLE: channel-misconfig error detected on Fa0/24, putting Fa0/24 in err-disable
state
Switch2#
Switch1# show etherchannel summary
!output omitted
Group Port-channel Protocol Ports
--------------------------------------------
1 Po2(SD) LACP Fa1/0/23(D)
Switch2# show etherchannel summary
!output omitted
Group Port-channel Protocol Ports
--------------------------------------------------------
1 Po1 (SD) - Fa0/23(D) Fa0/24(D)
An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on Switch2. Based on the output, which action resolves this issue?
A.
Configure more member ports on Switch1.
B.
Configure less member ports on Switch2.
C.
Configure the same port channel interface number on both switches.
D.
Configure the same EtherChannel protocol on both switches.