Refer to the exhibit. An engineer must deny HTTP traffic from host A to host B while allowing all other communication between the hosts. Drag and drop the commands into the configuration to achieve these results. Some commands maybe used more than once. Not all commands are used.



SW1(config)# ip access-list extended DENY-HTTP SW1(config-ext-nacl)# permit tcp host 10.1.1.10 host 10.1.1.20 eq www SW1(config)# ip access-list extended MATCH_ALL SW1(config-ext-nacl)# FIELD 1 ip any any SW1(config)# vlan access-map HOST-A-B 10 SW1(config-access-map)# match ip address DENY-HTTP SW1(config-access-map)# FIELD 2 SW1(config)# vlan access-map HOST-A-B 20 SW1(config-access-map)# match ip address MATCH_ALL SW1(config-access-map)# FIELD 3 SW1(config)# vlan filter HOST-A-B vlan 10