| Exam 300-510 | Question id=5195 | Unicast Routing |
Refer to the exhibit.
R2#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
10.1.3.3 1 FULL/BDR 00:00:37 10.1.234.3 Ethernet0/0.234
10.1.4.4 1 FULL/DR 00:00:35 10.1.234.4 Ethernet0/0.234
10.1.5.5 1 2WAY/DROTHER 00:00:35 10.1.234.5 Ethernet0/0.234
Why is neighbor 10.1.5.5 stuck in “2WAY” state?
| A. |
Router ID 10.1.5.5 is not reachable from R2 | |
| B. |
OSPF authentication has failed between R2 and 10.1.5.5 | |
| C. |
It is an expected behavior when OSPF network type is broadcast | |
| D. |
OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5 |