Sign Up
Log In
Home
discussion
Exam 300-101 Question id=447 Infrastructure Services

A network engineer executes the show ip flow export command. Which line in the output indicates that the send queue is full and export packets are not being sent?

A. output drops
B. enqueuing for the RP
C. fragmentation failures
D. adjacency issues

show ip flow export Field Descriptions

Fielddescription
Exporting flows to 10.1.1.1 (1000) and 10.2.1.1Specifies the export destinations an ports. The ports are in parentheses.
Exporting using source IP address 10.3.1.1Specifies the source address or interface.
Version 5 flow recordsSpecifies the versionof the flow.
11 flows exported in 8 udp datagramsThe total number of export packets sent, and the total number of flows contained within them.
0 flows failed due to lack of export packetNo memory was available to create an export packet.
0 export packets were sent up to process levelThe packet could not be processed by CEF or by fast switching, possibly because another feature requires running on the packet.
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
Indicates that CEF was unable to switch the packet or forward it up to the process level.
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
Indicates that the packet was dropped because of problems constructing the IP packet.
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
Indicates that the there was a problem transfering the export packet between the RP and the line card.
0 export packets were dropped due to output dropsIndicates that the send queue was full while the packet was being transmitted.

Reference