| Exam 300-101 | Question id=415 | Layer 3 Technologies |
What is the purpose of the autonomous-system {autonomous-system-number} command?
| A. |
It sets the EIGRP autonomous system number in a VRF. | |
| B. |
It sets the BGP autonomous system number in a VRF. | |
| C. |
It sets the global EIGRP autonomous system number. | |
| D. |
It sets the global BGP autonomous system number. |
To configure the autonomous-system number for an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process to run within a VPN routing and forwarding (VRF) instance, use the autonomous-system command in address-family configuration mode. To remove the autonomous-system for an EIGRP routing process from within a VPN VRF instance, use the no form of this command.
autonomous-system autonomous-system-number
no autonomous-system autonomous-system-number
Reference