Refer to the exhibit.
voice-card 0 dspfarm dsp services dspfarm sccp local FastEthernet0/0 sccp ccm 10.1.1.1 identifier 1 version 6.0 sccp sccp ccm group 1 associate ccm 2 priority 1 associate profile 1 register HQ_XCODER dsp farm profile 1 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 2 associate application SCCP no shutdown
You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?

A.	The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B.	The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.
C.	The sccp ccm group number needs to match the associate ccm 2 command.
D.	The maximum sessions command must match the number of codecs configured under the dsp farm profile.
E.	The sccp ccm group number must match the voice-card number.