| Exam 300-075 | Question id=2815 | VCS Control |
Refer to the exhibit.
controller T1 1/0
framing esf
linecode b8zs
pri-group timeslots 1-6,24
!
interface Serial1/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!
interface Vlan120
ip address 10.2.120.1 255.255.255.0
h323-gateway voip bind srcaddr 10.2.120.1
!
voice-port 1/0:23
!
dial-peer voice 123 pots
incoming called-number
direct-inward-dial
!
dial-peer voice 23000 voip
destination-pattern 2...
session target ipv4:10.1.5.11
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect toIP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001.Which two configuration changes can correct this issue?
| A. |
Add port 1/0:23 to dial-peer voice 123 pots | |
| B. |
Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4. | |
| C. |
Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All). | |
| D. |
Add the command h323-gateway voip id on interface vlan120 | |
| E. |
Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4 |
Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called.