You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remote site, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set of commands for this configuration?

A.	R1(config)# controller t1 1/0 R1(config-controller)# framing esf R1(config-controller)# linecode b8zs R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B.	R1(config)# controller t1 1/0 R1(config-controller)# linecode hdb3 R1(config-controller)# framing crc4 R1(config-controller)# clock source line R1(config-controller)# dsO-qroup 1 timeslot 1-24 type fxo-loop-start
C.	R1(config)# isdn switch-type primary-5ess Rl(config)# controller t1 t1/0 Rl(config-controller)# pri-group timeslots 1-24
D.	R1(config)# controller t1 1/0 R1(config-controller)# framing esf R1(config-controller)# linecode b8zs R1(config-controller)# clock source line R1(config-controller)# dsO-group 1 timeslot 1-24 type fxo-loop-start

---

WARNING

the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

Subject: other abuse explanation mistake

only logged users can write comments