You want to configure HSRP between a Cisco IOS and a Cisco IOS XR router for the 192.0.2.0/24 subnet. Half of the PCs on the 192.0.2.0/24 subnet are configured to use 192.0.2.1 as the default gateway, and the other half of the PCs are configured to use 192.0.2.254 as the default gateway. The intent is to load balance the traffic across both routers.
Which two IOS and IOS XR configurations are needed?

A.	! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.3 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 95 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 105 hsrp 2 preempt
B.	! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.1 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 99 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 101 hsrp 2 preempt
C.	! IOS-XR interface GigabitEthernet 0/0/0/0 ip address 192.0.2.3 255.255.255.0 router hsrp interface GigabitEthernet 0/0/0/0 hsrp 1 ipv4 192.0.2.1 hsrp 1 priority 1 hsrp 1 preempt hsrp 2 ipv4 192.0.2.254 hsrp 2 priority 1 hsrp 2 preempt
D.	! IOS interface GigabitEthernet 0/0 ip address 192.0.2.2 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 priority 105 standby 1 preempt standby 2 ip 192.0.2.254 standby 2 priority 95 standby 2 preempt
E.	! IOS interface GigabitEthernet 0/0 ip address 192.0.2.254 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 preempt standby 2 ip 192.0.2.254 standby 2 preempt
F.	! IOS interface GigabitEthernet 0/0 ip address 192.0.2.2 255.255.255.0 standby 1 ip 192.0.2.1 standby 1 preempt standby 1 priority 2 standby 2 ip 192.0.2.254 standby 2 preempt standby 2 priority 2

---

WARNING

the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

Subject: other abuse explanation mistake

only logged users can write comments