Refer to the partial Cisco IOS XR BGP configuration exhibit.
router bgp 64500 address-family ipv4 unicast network 10.1.1.1/32 ! address-family ipv6 unicast network 2001:db8:10:1:1::1/128 ! neighbor 10.2.1.1 remote-as 64500 update-source Loopback0 address-family ipv4 unicast ! ! neighbor 192.168.101.11 remote-as 64501 password encrypted 13061E010803 address-family ipv4 unicast route-policy Test1 in route-policy Test1 out ! ! neighbor 2001:db8:10:2:1::1 remote-as 64500 address-family ipv6 unicast ! ! neighbor 2001:db8:192:168:101::11 remote-as 64501 address-family ipv6 unicast route-policy Test1 in route-policy Test1 out ! ! ! end
Which two statements are true?

A.	This router uses its Loopback 0 interface IP address when establishing BGP peering with the 10.2.1.1 router.
B.	This router uses its Loopback 0 interface IP address when establishing BGP peering with the 192.168.101.11 router.
C.	Test1 refers to a route policy that is defined using the RPL.
D.	Both the IBGP and EBGP sessions will be authenticated.
E.	The IBGP session is missing the mandatory route-policy configuration.