Which set of commands assigns a standalone access point an IP address of 10.0.0.24 with a 27-bit subnet mask and a gateway of 10.0.0.1?

A.	cisco#configure terminal cisco(config)#interface BVI1 cisco(config-if)#ip address 10.0.0.24 255.255.255.192 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1
B.	cisco#configure terminal cisco(config)#interface BVI1 cisco(config-if)#ip address 10.0.0.24 255.255.255.224 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1
C.	cisco#configure terminal cisco(config)#interface FastEthernet1 cisco(config-if)#ip address 10.0.0.24 255.255.255.224 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1
D.	cisco#configure terminal cisco(config)#interface Dot11Radio0 cisco(config-if)#ip address 10.0.0.24 255.255.255.224 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1
E.	cisco#configure terminal cisco(config)#interface FastEthernet1 cisco(config-if)#ip address 10.0.0.24 255.255.255.192 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1
F.	cisco#configure terminal cisco(config)#interface Dot11Radio0 cisco(config-if)#ip address 10.0.0.24 255.255.255.192 cisco(config-if)#exit cisco(config)#ip default-gateway 10.0.0.1

---

WARNING

the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

Subject: other abuse explanation mistake

only logged users can write comments