WARNING

Question

You have a lightweight AP that has been moved to a new subnet and has become stranded because DNS and DHCP servers are unavailable. The AP cannot connect to the controller. When connected to the console port, which three minimum parameters must you configure?

A.	AP IP address
B.	controller name
C.	AP hostname
D.	default gateway IP address
E.	controller IP address
F.	username and password

previous question

next question

WARNING

the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

Accepted Answer

AP IP address

Accepted Answer

default gateway IP address

Accepted Answer

controller IP address

Accepted Answer

In order to manually configure static information on a LAP using the AP CLI interface, you can use these EXEC mode CLI commands:


AP#capwap ap ip address <IP address> <subnet mask>
AP#capwap ap ip default-gateway <IP-address>
AP#capwap ap controller ip address <IP-address>
AP#capwap ap hostname <name>

Notice the first 3 are needed for the AP to connect to the controller; the last step is optional and not needed for basic connectivity to the controller