The command statically defines the MAC address of 00c0.35F0.8301 as an allowed host on the switch port. By default, an unlimited number of MAC addresses can be learned on a single switch port, whether it is configured as an access port or a trunk port. Switch ports can be secured by defining one or more specific MAC addresses that should be allowed to connect, and violation policies (such as disabling the port) if additional hosts try to gain a connection.

The switchport port-security mac-address 00C0.35F0.8301 command statically defines the MAC address of 00c0.35F0.8301 as an allowed host on the switch port.

The switchport port-security mac-address 00C0.35F0.8301 command does not expressly prohibit the MAC address of 00c0.35F0.8301 as an allowed host on the switch port. The port-security command is designed to identify allowed MAC addresses not prohibited addresses.

The switchport port-security mac-address 00C0.35F0.8301 command does not configure an inbound access control list on port F0/1 limiting traffic to the IP address of the host. It will accept traffic to the port, but will only allow a device with that MAC address to be connected to the port.

The switchport port-security mac-address 00C0.35F0.8301 command does not encrypt all traffic on the port from the MAC address of 00c0.35F0.8301. The portsecurity command has nothing to do with encryption.