Sign Up
Log In
Home
discussion
Exam 200-301 Question id=5308 IP Connectivity

Which of the following commands will set the line speed of a serial connection that connects to a Channel Service Unit/Digital Service Unit (CSU/DSU) at 56 Kbps?

A. service-module 56000 clock rate speed
B. service-module 56k clock rate speed
C. bandwidth 56k
D. bandwidth 56000

The command service-module 56k clock rate speed will configure the network line speed for a 4-wire, 56/64-kbps CSU/DSU module.

The command service-module 56000 clock rate speed is incorrect because the speed must be stated in the form 56k (for Kbps), rather than 56000.

The bandwidth command is used to limit the amount of bandwidth used by an application when utilizing Quality of Service (QOS). It does not set the line speed of a serial connection that connects to a Channel Service Unit /Digital Service Unit CSU/DSU. Therefore, both the bandwidth 56k and the bandwidth 56000 commands are incorrect.