Refer to the exhibit.
00:00:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down 00:00:40: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan 00:00:42: %SYS-5-CONFIG_I: Configured from memory by console 00:00:42: %SYS-5-RESTART: System restarted-- Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc.1) Copyright(c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 28-Jul-06 11:57 by yenanh 00:00:44: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down 00:00:44: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up 00:00:44: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to up 00:00:44: %LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to up 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up 00:00:48: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to up 00:00:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/12, changed state to up
Which of these statements correctly describes the state of the switch once the boot process has been completed?

A.	The switch will need a different IOS code in order to support VLANs and STР.
B.	Remote access management of this switch will not be possible without configuration change.
C.	As FastEthernet0/12 will be the last to come up, it will be blocked by STP.
D.	More VLANs will need to be created for this switch.