| Exam 200-120 | Question id=80 | IP Routing Technologies |
R1#sh run | section router eigrp
router eigrp 10
network 172.16.1.0
network 10.1.1.0
auto-summary
R2#sh run | section router eigrp
router eigrp 10
network 192.168.100.0
network 10.1.1.0
network 10.1.2.0
auto-summary
R3#sh run | section router eigrp
router eigrp 10
network 192.168.1.0
network 10.1.2.0
auto-summary
R4#sh run | section router eigrp
router eigrp 10
network 192.168.100.0
Which EIGRP routes will be present in the router R4's routing table?
| A. |
192.168.1.0/24 | |
| B. |
10.1.2.0/30 | |
| C. |
10.1.1.0/30 | |
| D. |
172.16.1.0/24 | |
| E. |
192.168.100.0/24 | |
| F. |
10.1.0.0/16 | |
| G. |
10.0.0.0/8 | |
| H. |
172.16.0.0/16 | |
| I. |
192.168.100.0/30 |
EIGRP performs an auto-summarization each time it crosses a border between two different major networks. EIGRP will check if you have any subnets that fall within the range of your network command(s) and if so, it will advertise the classful A, B or C network to its neighbors. It will only summarize routes from subnets on its own interfaces, not the ones you learn from other routers.