Exam 200-120 Question id=73 WAN Technologies

MIK# show interfaces serial0/0 Serial0/0 is up, line protocol is up Hardware is cxBus Serial Description: Ciscoexam.online test 200-120 MTU 1500 bytes, BW 1544 Kbit/sec, DLY 20000 usec, reliability 255/255, txload 5/255, rxload 14/255 Encapsulation HDLC, crc 16, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 1/4096/50/1373822 (size/max/drops/flushes); Total output drops: 2460 Queueing strategy: fifo Output queue: 0/40 (size/max) 1 minute input rate 57154 bits/sec, 83 packets/sec 1 minute output rate 20589 bits/sec, 93 packets/sec 24000230464 packets input, 20473234056925 bytes, 461 no buffer Received 430703 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 19215631669 packets output, 8656077549335 bytes, 0 underruns 4 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions RTS up, CTS up, DTR up, DCD up, DSR up

The show interfaces serial 0/0 command was issued on the router.
Based on the output displayed which statement is correct?

A. The cable connected to the serial 0/0 interface of the MIK router is a DTE cable.
B. The MIK router can ping the router interface connected to the serial 0/0 interface.
C. The clock rate used for interface serial 0/0 of the MIK router is 1544000 bits per second.
D. The CSU used with the serial 0/0 interface of the MIK router has lost connection to the service provider.
E. The interface of the remote router connected to the serial 0/0 interface of the MIK router is using the default serial interface encapsulation.
previous question
next question

HDLC is the default encapsulation type for the serial interfaces for the Cisco routers


the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

only logged users can write comments