| Exam 200-120 | Question id=103 | Troubleshooting |
A department replace its hub with a Catalyst 2950 switch from another department. To prepare the
switch for installation, the network administrator has erased the startup configuration and reloaded the switch. However, PCs that are connected to the switch experience various connectivity problems. What is a possible cause of the problem?
| A. |
The VLAN database was not erased. | |
| B. |
The management VLAN is disabled | |
| C. |
The running configuration should have been erased. | |
| D. |
The switch was not configured with an IP address or a default gateway. |
To reset the VLAN information to the factory defaults, delete the vlan.dat file from the Flash or NVRAM and reload the switch. On the fixed configuration switches, issue the delete flash:vlan.dat command.