Refer to the output from the show running-config command in the exhibit. What should the administrator do to allow the workstations connected to the FastEthernet 0/0 interface to obtain an IP address?
R1-ABC#show running-config Current configuration: ! version 12.1 hostname ABC ! ip subnet-zero ip name-server 192.16 1.1 ip dhcp excluded-address 10.90.201.1 ! ip dhcp pool ABC_DHCP network 10.90.201.0 255.255.255.0 default-router 10.90.201.1 dns-server 192.31.7.152 ! interface FastEthernet0/0 no ip directed-broadcast ip nat inside ! interface Senal0/0 description to ISP circuit ID ALDS1-3456AX4743-00 ip address 192.31.7.38 255.255.255.255.252 ip nat outside ! ip nat inside source list 14 interface serial0/0 overload ip classless ip route 0.0.0.0 0.0.0.0 192.31.7.37 ! access-list 14 permit 10.90.201.0 0.0.0.255

A.	Apply access-group 14 to interface FastEthernet 0/0.
B.	Add access-list 14 permit any any to the access list configuration.
C.	Configure the IP address of the FastEtherent0/0 interface to 10.90.201.1.
D.	Add an interface description to the FastEthernet 0/0 interface configuration.