Refer to the graphic.

A company wants to use NAT in the network shown. Which commands will apply the NAT configuration to the proper interfaces?

A.	R1(config)# interface serial0/1 R1(config-if)# ip nat inside
B.	Rl(config)# interface serial0/1 Rl(config-if)# ip nat outside
C.	Rl(config)# interface fastethernet0/0 Rl(config-if)# ip nat inside
D.	Rl(config)# interface fastethernet0/0 Rl(config-if)# ip nat outside
E.	Rl(config)# interface serial0/1 Rl(config-if)# ip nat outside source pool 200.2.2.18 255.255.255.252
F.	Rl(config)# interface fastethernet0/0 Rl(config-if)# ip nat inside source 10.10.0.0 255.255.255.0