Exam 200-105 | Question id=1919 | WAN Technologies |
Refer to the exhibit.
RouterA#show interface pos8/0/0
POS8/0/0 is up, line protocol is up
Hardware is Packet over Sonet
Keepalive set (10 sec)
Scramble disabled
LMI enq sent 2474988, LMI stat recvd 2474969, LMI upd recvd 0, DTE LMI up
Broadcast queue 0/256, broadcasts sent/dropped 25760668/0, interface broadcasts 25348176
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 31w5d
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 39000 bits/sec, 60 packets/sec
63153396 packets input, 4389121455 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicast)
0 runts, 0 giants, 0 throttles
0 parity
44773 input errors, 39138 CRC, 0 frame, 0 overrun, 0 ignored, 27 abort
945596253 packets output, 62753244360 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
Which WAN protocol is being used?
A. |
ATM | |
B. |
HDLC | |
C. |
Frame Relay | |
D. |
PPP |
Show interface pos8/0/0 command showing LMI enq sent which show frame-relay encapsulation enabled on this interface. Cisco supports three different Local Management Interface (LMI) types for Frame Relay: Cisco, ANSI Annex D, and Q933-A Annex A