| Exam 200-105 | Question id=1851 | LAN Switching Technologies |
Which configuration can you apply to enable encapsulation on a subinterface?
| A. |
cisco(config)#interface FastEthernet 0/0
cisco(config-if)#encapsulation dot1Q 30
cisco(config-if)#ip address 10.1.1.30 255.255.255.0
| |
| B. |
cisco(config)#interface FastEthernet 0/0.30
cisco(config-if)#ip address 10.1.1.30 255.255.255.0
| |
| C. |
cisco(config)#interface FastEthernet 0/0.30
cisco(config-if)#description subinterface vlan 30
| |
| D. |
cisco(config)#interface FastEthernet 0/0.30
cisco(config-if)#encapsulation dot1Q 30
cisco(config-if)#ip address 10.1.1.30 255.255.255.0
|