WARNING

Question

Which configuration can you apply to enable encapsulation on a subinterface?

A.	`cisco(config)#interface FastEthernet 0/0 cisco(config-if)#encapsulation dot1Q 30 cisco(config-if)#ip address 10.1.1.30 255.255.255.0`
B.	`cisco(config)#interface FastEthernet 0/0.30 cisco(config-if)#ip address 10.1.1.30 255.255.255.0`
C.	`cisco(config)#interface FastEthernet 0/0.30 cisco(config-if)#description subinterface vlan 30`
D.	`cisco(config)#interface FastEthernet 0/0.30 cisco(config-if)#encapsulation dot1Q 30 cisco(config-if)#ip address 10.1.1.30 255.255.255.0`

previous question

next question

WARNING

the answers are mixed, do not specify in the comment number or the letter of the answer
please write answer#A instead A, answer#B instead B...

Accepted Answer


cisco(config)#interface FastEthernet 0/0.30
cisco(config-if)#encapsulation dot1Q 30
cisco(config-if)#ip address 10.1.1.30 255.255.255.0